- 1 pc - 18 liter Pail
- 2 pcs - Chemical Sorbent Sock HOS-SOC7612 ( 1 pc-able to absorb > 8.25 liters)
- 2 pcs - Chemical Sorbent Pillow HOS-PIL2025 ( 1 pc-able to absorb > 2.5 liters)
- 5 pcs - Chemical Sorbent Pads HOS-LMT2002( 1 pc-able to absorb > 0.725 liters)
- 2 pcs - Hazardous material disposable bag 24" x 30"
- 2 pcs - Cable Tie
- 1 prs - Anti Fog Goggle
- 1 prs - Nitrile Glove
- 1 pc - 18 liter Pail
- 2 pcs - Universal Sorbent Sock MOS-SOC7612 ( 1 pc-able to absorb > 8.25 liters)
- 2 pcs - Universal Sorbent Pillow MOS-PIL2025 ( 1 pc-able to absorb > 2.5 liters)
- 5 pcs - Universal Sorbent Pads MOS-LMT2002 ( 1 pc-able to absorb > 0.725 liters)
- 2 pcs - Hazardous material disposable bag 24" x 30"
- 2 pcs - Cable Tie
- 1 prs - Anti Fog Goggle
- 1 prs - Nitrile Glove
- Marine Life Jacket
- Ligth weight & easy to wear
- Comes with 2 pcs x 40 mm waist strap & 1 pcs crotch strap & whistle to attract attention during emergency
- Standard micro-prismatic material on collar.
- SIRIM test report : No 2005MA0686
- Inflatable Life Jacket
- Light weight & manufactured according to EN 396 : 1993/A1:1998
- Manually or automatically inflated life jacket
- It is equiped with reflective stripes, oral inflation tube for inflation & deflation & whistle which can attract attention during emergency
- Economic Marine Life Jacket
- Comes with 2 pcs x 25 mm waist strap & a whistle to attract attention during emergency
- Astandard retrorefelctive material on shoulder
- Free size
- Spring Extendable Lanyard
- Built In with 2-pcs FL-1LH spring lanyard with 4 pcs carabiner & 1-pcs of energy absorber
- Conform to BS EN 354 & Sirim Certification No: PPO71005, For Energy absorber BS EN 355 & Sirim Certification No: PPO71004
- Static Strenght > 22kN
- Opening : 20mm
- Conform to BS EN362 & Sirim certification No : PPO71009
- Safety Belt
- 58mm width webbing with standard tool bag
- 2-pcs lateral positioning D-ring
- Built-in with 12mm x 1.46m polyamide lanyard with 1-pcs Large Opening hook
- Safety Belt
- 50mm width webbing with standard tool bag
- 2-pcs lateral positioning D-ring Built-in with 12mm x 1.6m polyamide lanyard with 1-pcs front Large Opening hook
- Safety Belt
- 50mm width webbing with standard tool bag
- 1-pcs lateral positioning D-ring
- Built-in with 12mm x 1.6m polyamide lanyard with 1-pcs front press snap hook
- Safety Belt
- 50mm width webbing with standard tool bag
- 2-pcs lateral positioning D-ring
- Built-in with 12mm x 1.6m polyamide lanyard with 1-pcs front press snap hook
- Polyamide Lanyard
- Built in with 2-pcs - 1.6M-LH lanyard with 2-pcs carabiner & 1-pcs of energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Polyamide Lanyard
- Built in with 2-pcs - 1.6M-SH lanyard with 2-pcs carabiner & 1-pcs of energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Polyamide Lanyard
- Built in with 1.6M-LH lanyard with 2-pcs carabiner & 1-pcs of energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Polyamide Lanyard
- Built in with 1.6M-SH lanyard with 2-pcs carabiner & 1-pcs of energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Energy Absorber
- Budget & mini version which made of 25mm width webbing
- Impact force will be under 6kN
- Conform to BS EN355 Sirim certification No : PPO71004
- Mini Block
- Built in with 1-pc carabiner
- Max Lenght : 2.5M
- Conform to BS EN360 & Sirim certification No:PPO71007
- Static Strenght > 22kN
- Conform to BS EN362 & Sirim certification No : PPO71009
- Energy Absorber
- Standard version which made of 44mm width webbing
- Impact force will be under 6kN
- Conform to BS EN355 Sirim certification No : PPO71004
- Safety Belt
- 50mm width webbing with standard tool bag
- 1-pcs lateral positioning D-ring
- Built-in with 10mm x 1.6m polyamide lanyard with 1-pcs front press snap hook
- Economic Polyamide Lanyard
- Built in with 2-pcs - EV220-SH lanyard with 2-pcs carabiner & 1-pcs of mini energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Economic Polyamide Lanyard
- Built in with 2-pcs - EV230-LOH lanyard with 2-pcs carabiner & 1-pcs of mini energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Economic Polyamide Lanyard
- Built in with EV220-SH lanyard with 2-pcs carabiner & 1-pcs of mini energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Economic Polyamide Lanyard
- Built in with EV 230-LOH lanyard with 2-pcs carabiner & 1-pcs of mini energy absorber
- Conform to BS EN354 & Sirim certification No : PPO71005 lanyard, BS EN355 & Sirim certification No : PPO71004 for energy absorber
- Economic Polyamide Lanyard
- Rope size is 12mm dia x 2m polyamide lanyard built in with 2-pc Large opening hook
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Economic Polyamide Lanyard
- Rope size is 12mm dia x 2m polyamide lanyard built in with 1-pc press snap hook & 1-pc Large opening hook
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Economic Polyamide Lanyard
- Rope size is 12mm
- EV210-LOH - 2M
- EV-230-LOH - 1.6M
- Built in with 1-pc large opening hook
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Economic Polyamide Lanyard
- Rope size is 12mm
- EV200-SH : 2M
- EV-220-SH : 1.6M
- Built in with 1-pc press snap hook
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Anchor Sling
- Material : 45mm folded webbing
- Strenght > 22kN
- Length : 1m
- Conform to BS EN795 & Sirim certification No : PPO71008
- 13 gauge Razor X5 fiber knitted gloves provides excellent cut resistant level 5 according to EN388
- Split Leather sewn on sleeves for dexterity & abrassion resistant.
- Cut Level : 5
- Material : HPPE Yarn, Leather, Spandex & Rubber
- Colour : Melange
- Available sizes : Free Size
- Performance Properties : 454X
- Packaging : 1 pair / Polybag
- 13 gauge Razor X5 fiber knitted gloves provides excellent cut resistantlevel 5 according to EN388
- Ligthweight construction sleeves.
- Cut Level : 5
- Material : HPPE yarn, Spandex, Rubber
- Colour : Melange
- Available sizes : Free Size
- Performance Properties : 454X
- Packaging : 1 pair / Polybag
· Two pieces, jackets and pants comes with storage bag.
· Attachable drawstring hood concealed in the collar
· Ventilated cape back with polyester mesh lining
· Jacket with zipper and plastic snaps closure
· Two pockets
· 50mm reflective tapes around the body, sleeves and leg.
· Bound seams – superior strength, water barrier
· Elastic inner wrist cuffs.
· Elastic waist pants with fly opening and snap buttons.
· Side slit on both sides of pants.
· Leg openings with adjustable plastic snap buttons / stud fastening on ankle
· Extremely light weight
· 100% waterproof
· All snap buttons are non-conductive, non-corrosive and rustproof
• Raincoats come with a storage bag
• Attachable drawstring hood concealed in the collar
• Ventilated cape back with polyester mesh lining
• Jacket with zipper and plastic snaps closure and two pockets.
• Comes with 50mm reflective tapes around the body, sleeves and leg.
• Bound seams – superior strength, water barrier
• Elastic inner wrist cuffs.
• Extremely light weight
• 100% waterproof
• All snap buttons are non-conductive, non-corrosive and rustproof
- Material : PP Non Woven with PE coating
- Chemical resistant to protech chemical splash
- Free size
- Packaging : 1pc / polybag
- 13 gauge Razor X3 aramid sleeve provides execellent cut resistant protection to the arm & hand
- Aramid Liner is resistant to moderate heat
- Cut Level : 3
- Material : Aramid Yarn
- Colour : Yellow
- Available sizes : Free Size
- Standard : EN407 Performance Properties : 234X
- Packaging : 1 pair / Polybag
- Welding Leather Jacket
- Made of quality cow grain leather with two vertical level buttons for adjustable sizes
- Excellent body protection against heat, welding sparks & harmful welding rays
- Synthetic Leather Apron
- Made of high quality synthetic PU leather
- Provides ample body protection & abrasion proof
- PVC Blue Apron
- Covered front & back of the user
- Made of high quality PVC for exta protection
Poly-Vinyl Apron
Extremely light weight & flexible
Great resistant to chemical, fat, oils and grease
Neck loop & waist ties is made from cotton for extra comfortable
- Disposable Coverall
- Protection against dust, liquid, oil grease, blood, saline diluted & etc
- soft & ligthweight fabric
- Leather Protective Sleeve
- Made of quality split cow leather
- Sew-on adjustable shoulder straps
- Protection against welding sparks & extremely light weight
- Leather Protective Apron
- Available Colour : Grey & Yellow
- Made of quality split cow leather
- Sew on adjustable neck loop & waist ties
- Size : 24'' x 36''
- Heavy Duty Rainsuit
- Waist pants feature with elastic band for multiple waist sizes
- All snap on button are non conductive, non corrosive & rustproof
- Heavy Duty Rainsuit
- All snap on button are non conductive, non corrosive & rustproof
- Heavy Duty Poly-Vinyl Apron
- Made of PVC on polyester broadloom fabric
- Great resistant to chemical fat, oils & grease Neck loop & waist ties is made from cotton for extra comfortable
- Size : 28'' x 40''
- Heat Protective Apron
- Made of Aramid & Aluminized Fabric
- Sew-on-neck loop and waist ties
- Size : 27'' x 36''
- Furniture Leather Apron
- Made of high quality leather
- Provide ample body protection & extremely lightweight
- Size : 24'' x 35''
- Cotton Jacket
- Available Colour : Navy Blue,Orange, Light Blue, & Grey
- Made of 100% cotton for coolness & comfort.
- Pre-shrunk material that protect against high percentage of shrinkage.
- Come with long sleeve, front button, 2 waist pockets with flaps & buttons
- Can be worn over cloths
15 Piece: To suit 5/16" hex, 3/8" & 1/2" square drives. Complete with Crosspoint: No.1, 2, 3 & 4. Flat Bits: 6, 8, 10 & 12mm. Hex Bits: 4,5, 6 & 8mm.
- Size: 12"
- V: 220-240
- Phase single
- Hz50/60
- W520
- r/min: 2800/3300
- m3/min:65
- dB(A)71
- (Pa)373
- c/w 5 Meter Dust Hose
Kyoritsu 4102A EARTH TESTER
• The latest circuit design permits the instrument to operate
with the minimum of influence from earth voltage
and earth resistance of auxiliary earth spikes.
• Dust and drip proof. (designed to IEC 529 IP54)
• Earth resistance value can be read directly from the scale.
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.
• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests
without tripping earth leakage current breakers
in the circuit under test.
• Lead wire connection to C and P terminals and proper
auxiliary earth resistance can be checked by "OK" lamp.
Lead wire connection to C and E terminals is good
when "OK" lamp is illuminated.
• High sensitivity, miniature AC/DC clamp meter.
• 0.1mA minimum resolution for AC current and 1mA minimum resolution for DC current.
• Output terminal for recorder connection.
• New technology permits safe testing, without the need of direct contact between probes and live wires.
• The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the back side.
• Wide measuring range for 3 phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED's indication also in sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.
Kyoritsu 8031F 3 Phase Indication meter
• KEW8031F is designed to check phase sequence.
Lamps provided on the unit will also tell you if a phase is open.
• Can check a wide range of 3-phase power source from 110V to 600V.
Sealed against dust, the unit ensures trouble-free performance.
• Small, Lightweight and portable.
Designed for maximum ease of operation and ruggedness.
• No exposed metal parts, Safety features are incorporated including the instant push button switch operation.
• Digital Phase Indicator with open phase checker.
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
• Small, lightweight, and portable.
• Digital Phase Indicator with open phase checker
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
• Small, lightweight, and portable.
• Designed to meet IEC 61010-1 CAT III 600V
• Test leads with remote control switch.
(For insulation&Simplified Earth Test)
• Back light function.
• Color coded scales and range switch position for easy reading.
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
• Can be hung around the neck for both hand’s operation.
- Continuity Measurement
- Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity. Null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a flashing LED, buzzer and indication on the display.
- Insulation Measurement
- Three selectable test voltages 250V, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display.
- Loop Impedance Measurement
- A patented (ATT) low current loop impedance test enables high accuracy loop measurements and quick testing without tripping RCD's.
- A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. The KEW 6016 allows also for phase to phase loop tests.
- PSC / PFC Measurement
- The Prospective Short Circuit Current (PSC) and Prospective Fault Current (PFC) are automatically calculated and shown on the display. As loop testing, the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs.
- RCD Measurement
- The KEW 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed).
- Measures at 1/2x, 1x, 5x of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or 50V depending on application.
- Earth Measurement
- Using the classical Volt-Amper method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories.
- Phase rotation
- KEW 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display.
- Voltage Measurement
- In addiction to the voltage measurement, this function gives also the Frequency of the voltage under test.
• Complies with IEC 61557
• Designed to IP 54 Rating
• Live circuit and wiring connection check LED's
• Triple ranges insulation tests at 250, 500 and 1000V
• Triple range loop and PSC tests 15mA test current at 200Ω/2000Ω range(No RCD Trip)
• Phase angle selection on RCD ranges
• Polarity switch for continuity tests
• Auto-null facility for continuity tests
• Earth probe for loop impedance testing on extraneous metalwork
• Contact Voltage Reading
• Test of a large kind of RCD's: Standard, Selective, AC and A
(DC sensitive breakers)
• Measurement of RCD trip time
Conducting testing of rated residual non-operating currents at
× 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges.
• Measurement of trip out current
Measuring trip out current by varying current automatically.
• Remote Test
Enabling a user to hold the Test Leads with his both hands
by locking the Test Button. Measurement will automatically
start when the main voltage is detected.
• Voltage Measurement
Carrying out a constant measurement of voltage in the
stand-by mode at each Range.
• Auto-detection of Contact voltage
Detecting the voltage to earth of Earth electrodes or
Protective conductors during RCD test - when applying
test currents - at measurement using EARTH in order to
prevent electrical shocks caused by the damaged earth.
Measurement will be ceased at AC50V or more.
• Dust- and Water-proof
Dust- and Water-proof construction
(designed to IEC 60529 IP54).
• Backlight
Facilitating working at dimly illuminated locations.
• Digital Light Meter
• 3 ranges changeable from low to high illuminance. (200/2000/20000lux)
• Data hold function.
• Digital light meter with separate light recieving sensor and meter.
Various useful functions are available on Android devices using Bluetooth communication
• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements)
• Saved data includes measurement, GPS location and date & time Easy to check on map "When" and "Where" the measurement was made
• Comparator function on Android device informs when the measured value is lower/higher than the preset value
Earth /Ground resistance and Leakage current measurement functions
• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems
• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments
• Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above.
• Dual Display allows simultaneous measurements like Loop & PFC/PSC.
• Two wire connection for Loop L-L, L-N and PSC testing is possible.
• Phase rotation, Voltage and Frequency measurements.
• Lock-down test button for 'hands free' testing with auto-start operation.
• Display and front panel keyboards with Backlight to be visible in dark places.
• Water and Dust proof (IP54)
• Custom microprocessor controlled for highest accuracy and reliability.
• 3 LEDs for checking correct wiring status.
• 15mA LOOP measurement:
LOOP impedance 2000Ω range measurement is carried out with low test current (15mA).
The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA).
• Direct reading of Prospective Short Circuit Current (PSC).
• Safe voltage measurement function.
• Large custom digital display readout on all models.
• Measure low loop resistances(resolution of 0.01Ω)
• Automatic lock-out if test resister overheats.
• Large custom digital display readout .
• Visual indication of reversed phase and neutral wiring at socket.
• Designed to IP54 Rating
• Complies with IEC 61557
Earth Resistance & Resistivity Tester
• High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range.
• Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements.
• Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW 4106 will select the most suitable Frequency.
• Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
• Warning for excessive noise and high Auxiliary Earth Spikes resistance.
• Large Graphic Display with backlight for readings in poorly illuminated areas.
• Up to 800 measurement results can be saved in the memory and recalled on the display.
• The stored results can be transferred to a PC using the "KEW Report" software and a USB adaptor (Model 8212-USB) which are included.
• Robust design with IP54 protection.
4102A-H Hard Case Model
• The latest circuit design permits the instrument to operate
with the minimum of influence from earth voltage
and earth resistance of auxiliary earth spikes.
• Dust and drip proof. (designed to IEC 529 IP54)
• Earth resistance value can be read directly from the scale.
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.
• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests
without tripping earth leakage current breakers
in the circuit under test.
• Lead wire connection to C and P terminals and proper
auxiliary earth resistance can be checked by "OK" lamp.
Lead wire connection to C and E terminals is good
when "OK" lamp is illuminated.
• 1000V/2000MΩ
• Expanded megohm scale for easy reading.
• New robust housing case to prevent damage.
• AC voltmeter scale for easy reading.
• Neck strap for both hand’s operation.
(Photo:3165)
Analogue Insulation Tester
• 500V/1000MΩ(Model 3165)
• Expanded megohm scale for easy reading.
• New robust housing case to prevent damage.
• AC voltmeter scale for easy reading.
• Neck strap for both hand’s operation.
Analogue Insulation / Continuity Tester
• Miniature lightweight insulation tester. It weighs only 340g(battery included),
but carries full measurement functions.
• Automatic discharge of circuit capacitance.
• Test leads with remote control switch.
• New robust housing case.
• Back light function.
• Neck strap for both hands operation
Analogue Insulation / Continuity Tester
•Dust and drip proof construction. (designed to IEC 60529 IP54)
•Designed to meet IEC 61010-1 and IEC 61557 safety standard.
•1mA rated test current at the minimum resistance.
•200mA measuring current on continuity testing.
•Automatic discharge of circuit capacitance.
(Any charge stored in the circuit under test will be automatically discharged after testing.)
•Live circuit warning buzzer and neon lamp.
•Small and lightweight. Shock resistant new case material.
•AC voltmeter with linear, easy-to-read scale.
•Operates on AA, R6 × 6 dry batteries.
The Model 3131A offers unmatched performance, and feature including test lead resistance zero adjustment for time-saving continuous operation, a clear ease to read illuminated scale, and a live circuit warning.
• Test insulation up to 100MΩ at 250V, 200MΩ at 500V, 400MΩ at 1000V and continuity up to 20Ω.
• LIVE circuit warning lamp plus audible warning.
• Automatic discharge of circuit capacitance when TEST button is released.
• Fuse protected (continuity range only).
• Battery check LED.
• Front panel zero adjust.
• Back light function to facilitate working at dimly lit situations.
• PRESS TO TEST button with lock down feature.
• Short-Circuit Current up to 5mA
• Wide range measurements from 500V to 5000V and up to 1TΩ
• Large digital display with Bar Graph indication and white LED back light
• Polarization Index measurement (PI), Dielectric Absorption Ratio (DAR)
• Filter function reduces noise interference for obtaining stable measurement
• Indication of Output voltage and Discharge voltage
• Auto-discharge function and Output voltage warning function
• Auto power off and Battery Indicator
• Safety standard IEC 61010-1 CAT III 600V
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
• Rugged design with a hard carrying case for field use
• Detachable High Voltage Line probe
• Automatic ranges, high and low scales, indicated by different LED's
• Drip proof
• Extremely easy and simple operation
• Automatic ranges, indicated by individual LED's
• Newly-designed alligator clip
• It comes with a tough hard case
• Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
(Photo: 3121B)
• 3 functions in one unit, insulation test with 4 voltage ranges,
continuity test, AC voltage measurement
• 200mA measuring current on continuity testing
• Comparator function with PASS / FAIL and buzzer
• 0Ω adjustment at continuity measuring range
• Memory function up to 99 data
• Backlight LCD provides easy reading in dark locations
• Safety lock system prevents an erroneous operation
on 500 and 1000 Volt ranges
• Safety standard IEC 61010-01 CAT III 600V
Kyoritsu 3005A Insulation/Continuity Tester
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.
• 0.01mA resolution for DC current
• Top class measurement 0.2% accuracy
• Ø6mm clamp jaw easy to use in tight places
• Measurement from 0.01mA to 120.0mA
• Dual display with backlight shows both mA measurement and percent of 4-20 mA span
• Spotlight for illuminating measurement point
• Analog output terminal for recorder connection
• Complies with IEC 61010-1 CAT II 300V
|
|
• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges:40mA/400mA/400A.
• Resolution 0.01mA.
• High Sensitive Model
• Frequency Selector Switch to eliminate the effect of harmonics.
• Three AC current ranges:4mA/40mA/100A.
• Resolution 0.001mA
-
True RMS for accurate readings on distorted waveforms.
-
Auto-ranging and data hold for ease of use.
-
Backlit display for low-light conditions.
• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal
• Resolution 0.1mA
• Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement.
• Frequency filter switch to eliminate the effect of harmonics.
• Output terminal.
• Resolution 0.1mA.
Kyoritsu 2300R Digital Fork Current Tester
• True RMS reading is an essential feature for accurate measurement.
• “Non Contact” voltage function indicates the presence of AC voltage by warning the user with an audible signal.
• Set the DC current range to zero in one touch with the Zero Adjust function.