- Automotive Tools & Equipment/Battery & Electrical Tools
- Automotive Tools & Equipment/Engine Series
- Automotive Tools & Equipment/Fluid Exchanger
- Automotive Tools & Equipment/Garage Equipment
- Automotive Tools & Equipment/General Tools
- Automotive Tools & Equipment/Roller Cabinets & Professional Tools Kits
- Automotive Tools & Equipment/Undercar
- Automotive Tools & Equipment/Workshop & Roadside Assistance
- Drop forged CR-V steel jaws & leaded screws (270mm) both heat treated ensure you obtain professional job performance.
- The tool is designed for use in limited space under wheel arch.
- Jaws design is fitting to wrap coil claws for safely.
- Maximum jaw opening is 270mm.
- Drop forged CR-V steel jaws & leaded screws (370mm) both heat treated ensure you obtain professional job performance.
- The tool is designed for use in limited space under wheel arch.
- Jaws design is fitting to wrap coil claws for safely.
- Maximum jaw opening is 370mm.
- Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts.
- Includes three sets of pins to suit lock nuts with pin holes.
- KT-1954 Ball joint puller
- Heat treated drop forged steel body and bolt for long rough usage.
- Spread ball joints easily where space prevents the use of direct action method.
- Jaws open : 19mm.
- This universal tie rod end remover will work on most cars and light trucks.
- The necessary force needed to remove tie rod end is easily applied through the centre pivot action.
- Fork open : 20mm, Reach : 20mm-50mm
- Suitable for : VW-Audi, BMW, Fiat, Ford, Mercedes, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Volvo
- This universal tie rod end remover will work on most cars and light trucks.
- The necessary force needed to remove tie rod end is easily applied through the centre pivot action.
- Fork open : 20mm, Reach : 50mm-80mm
- Suitable for : Opel Rekord, Senator, Monza, VW Transporter
- Easy to work in the narrow space.
- Extra work on nose makes it compact.
- A socket with ratchet is used to turn the actuating screw for adjustment.
- With cutter.
- Spring compressors are multi-application tools specifically.
- Developed for modern McPherson suspensions, using a range of 3 sets of interchangeable monobloc forks.
- Economical-fast and easy, reduces labor costs.
- Versatile- handles most standard and ABS brake systems.
- Clean- collects old brake fluid without spillage.
- Quiet- integrated silencer for a quieter working environment.
- Silicon suction assembly with universal rubber fitting.
- Capacity : 2L
- Working pressure : 70-170psi
- Air inlet : 1/4"
- Temperature range : -3°F ~ 140°F
KINGTOYO KT-2500A HEAVY DUTY IMPACT DRIVER / IMPACT SCREWDRIVER
Features : * Solid & Strong handle, strong shock resistance. * Easily loosen rusted screws or not without much effort * Impact with additional 6 batches of head. * Applicable scope: this series of products can be used to repair the automotive, motorcycle, machinery ,can convert the hammer momentum into the torque screwdriver, will take out the screws easily. Specification : * Model : KT-2500A * Set type : multifunctional combination set * Insulation : Yes * Material : Chrome-vanadium Steel * Rotary rod type : multiple * Weight : Approx 1 KG * Size : approx. 160 x 30 x 30mm * Made in Taiwan
- Pulls flange-type rear axles on latest model passenger cars & light trucks.
- Designed to fit axles with bolts & studs up to 9/16" diameter.
Easy to use, suitable for most vehicle liquid such as engine oil, gear oil, transmission oil, brake fluid water.
Features:
Polyethylene construction:
imprevious to automotive & household chemicals
will not rust or corrode.
Large Capacity 7.3 Liter fluid reservoir
Automatic flow control prevents overfilling
Pressure relief valve for safety
High Quality and Durability
Features:- Brand: King Toyo Item Model: KT-H1724 Material: CR-V Finish: Black Finish 4 Metric Hex Sizes Tool For Locking The Front Wheel Pin 3/8" DR. With 17mm, 19mm, 22mm, 24mm Hexagon All in One Universal Hexagon Nuts For Locking Wheel Pin One Of Car Professional Tool For Repairman Special Features:- One Of Professional Tool For Automotive Car Sector. Special Tool For Repairing For Front Wheel Part. Made Of Quality Black Hardened CR-V, Black Finish Material Able To Lock Wheel From Turning Clockwise Or Anti-Clock Wise. Hexagon Tools With Size 17mm, 19mm, 22mm, 24mm Hexagon Box Socket Size 17mm & 22mm At One Side While 19mm & 24mm At Another Sizes. Use Centre Hole To Lock Wheel Pin , While Use Spanner At The Other End To Position Wheel From Turning. Available Spannar Wrench Size For Opening Hexagon Box Point Socket Is 17mm, 19mm, 22mm Or 24mm.
Material: CR-MO
DIN Germany Chrome Vanadium
6 Points Socket Sizes: 8, 10, 12, 13, 14, 17, 19, 21, 24 & 27MM
Socket Drive Size: 1/2"
KingToyo KTOF-30160 (Handle Length: 9" & Chain Length: 22") Oil Filter Chain Wrench
Material: CRV Steel + Steel Chain Feature: Used for the disassembly and assembly of round oil filter, and the fastening of round pipe fittings Convenient for adjustment. It is the necessary tool for vehicle maintenance and repair Drop-forged steel body with hanging hole Extended-pin chain and twin-claw body for positive and reliable chain retention. For all type oil filters, radiator caps and hub caps use Can be used in both direction without being removed Fully adjustable universal chain design fit any diameter oil filter Available in 2 models and size for oil filter
- midget size N.W. less than 1kg for easy carry & operation
- pneumatic extractor non-spark
- one man in same step operation
- 1 meter silicon hose with universal rubber adaptor can fit most vechile brake oil bleeder fitting
- fixing valve & safety cup for automatic cut-off extracting
- The 100mm length allows easy access to recess head bolts.
- Come with 1/2" drive for using with a torque wrench.
- Use for TOYOTA Tercel cylinder head bolt.
- Makes it easier to insert bearing race and seals without damage to race and axle housing. This master set includes 9 disc sizes to fit most standard wheel bearings. Turn disc over to drive seals. Package in convenient clam shell for storage.
- Include drive handle with bolt, plus these tool sizes:
- 1.565", 1.75", 1.965", 2.325", 2.47", 2.555", 2.83", 2.995" and 3.18".
- Heavy duty forged alloy steel yoke.
- Heated treated center screw.
- Remove tie rod ends and pitman arm assemblies from many light trucks.
- Opening size : 27mm
- Pull travel : 45mm
- Bearing separator 50mm & 75mm inside.
- Pullout the bear with the H-type beam and bolts.