• Handle offers a square/mitre feature with 45D and 90D angles
• Contoured sturdy handle designed for comfort and control condolences
• Full length protective sleeve
• Contents: 6T/7PT 20"
• Tooth pattern:Crosscut

• Handle offers a square/mitre feature with 45D and 90D angles
• Contoured sturdy handle designed for comfort and control condolences
• Full length protective sleeve
• Contents: 6T/7PT 22"
• Tooth pattern: Crosscut

• Shaft 15% longer for better balance & control in usage
• Grip 15% longer for better performance
• Individually heat-treated for long life
• Hardened and tempered tubular steel shaft for strength
• Flock-filled rubber grip for comfort and durability
• Meets ANSI standards
• Head Length: 335mm (13 1/4")
• Weight: 450gm (16oz)

• 1/2” 6 Point Standard Sockets - Metric
• Made of chrome vanadium steel.
• Chromed finish for exceptional resistance to rust.
• MaxiDrive gripping system:rounded gripping surface allows for 15% more torque and avoids rouding off fasteners,providing higher tenacity.

Features & Benefits

• Adjustable thumb-dial locking wheel holds blade in place and prevents shifting
• Swivels open for quick blade change – no tools required
• Rear blade storage for seven blades
• Ergonomically designed rubber grip fits comfortably in hand
• Lightweight, durable body

Features & Benefits

• Heavy duty blade, ideal for carpet and vinyl
• Replacement blade for 10-099, 10-175, 10-777, 10-779 & 10-804
• Length: 62mm
• Blade: 19mm (3/4")
• Width thickness: 0.65mm

• Professional smoothing plane
• Designed for final finishing of cabinet and general joinery work with a 45mm blade width
• Made from accurately machined fine grey iron castings
• Simple and rapid adjustment mechanism
• Easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment
• Black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of this model

• Stanley professional smoothing planes have been designed for final finishing of cabinet and general joinery work with a 45mm blade width. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment.
• A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.

• The Bailey fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards.
• It is fully adjustable and has a machined frog and cutter seatings to reduce chatter.
• It also has a special cap iron design which curves shavings and prevents clogging.

• Fully adjustable for depth of cut, cutter alignment and size of mouth.
• Cutter seats at 21 degrees.
• Ideal for end grain and general purpose fine finishing.

• Fine grey iron base accuratley machined for stability and precision in use
• Light duty
• Easily and simply adjusted
• Chrome carbon cutter
• Simple lateral and depth adjustment
• Virtually unbreakable high impact injection moulded handles for comfort and long life

• Stanley 5-12-060 Block Plane - Low Angle
• The Stanley 60.1/2 low angle block plane has cutter angle set at 12 degrees for plastics laminates and end grain.
• Smooth lever action with screw adjustment for depth of cut.
• Mouth is adjustable for coarse and fine work on the Stanley 60.1/2 Block Plane 1 12 060 1-12-060

• Made from fine grey iron with all working surfaces accurately machined for precise results
• Two cutter positions for regular and bull nose work
• The cutter is adjustable for depth-of-cut in the rear position
• To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied
• A cutting spur is also provided for cross grain work

• A non-adjustable general purpose block plane. Ideal for model makers, craft applications and light-duty jobs.

• A non-adjustable general purpose block plane. Ideal for the occasional user or DIY'er for a range of light-duty applications.

• Professional fully adjustable metal plane
• General purpose bench plane for workshop, site or fine finishing
• Kidney shaped lever cap screw hole prevents accidental slippage of cutter
• Chrome carbon steel cutter hardened and tampered to retain a keen cutting edge
• Fully adjustable frog for all tasks and timber types
• Virtually unbreakable polypropylene handle and knob shaped for comfort
• Finger tip adjustment for depth of cut and cutter alignment
• Tight fitting spring steel cap iron for perfect shaving flow
• recision cast fine grey iron base for stability and wear resistance
• Precision ground base and sides ensure performance to the highest tolerances

• Professional fully adjustable metal plane
• General purpose bench plane for workshop, site or fine finishing
• Kidney shaped lever cap screw hole prevents accidental slippage of cutter
• Chrome carbon steel cutter hardened and tampered to retain a keen cutting edge
• Fully adjustable frog for all tasks and timber types
• Virtually unbreakable polypropylene handle and knob shaped for comfort
• Finger tip adjustment for depth of cut and cutter alignment
• Tight fitting spring steel cap iron for perfect shaving flow
• recision cast fine grey iron base for stability and wear resistance
• Precision ground base and sides ensure performance to the highest tolerances

•  Both the 12-247 and 12-220 have machined sides
•  Cutter rests at a 21° angle, ideal for cross-grain planing
•  Cutter is fully adjustable for depth of cut and alignment
•  Gray, cast-iron base with precision-ground sides and bottom
•  Durable epoxy coating provides long-lasting protection
•  Finger-rest at front of plane adds comfort and control

• Drop-forged carbon steel material, hardened, tempered, grown, glazed & tested to last
• Cold-rolled steel: 0.91
• Stainless steel: 0.63
• Size: 12"

Lenght(mm)           : 305

Lenght(inches)      : 12

Max Cutting Load: 46

Features & Benefits:

• Excellent for cutting aluminium, vinyl siding, screening, cardboard, leather & copper
• Exceeds ANSI standards for cutting perfomance and durability
• Double overwind spring for longer life
• Hight leverage, compound cutting design cuts up to 18-gauge steel
• Patented hinge plate for easy product function identification
• Inches: 10" (254mm)
• Cut type: Straight cut
• Cutting length: 35
• Copper (soft): 1.50
• Cold-rolled steel (mild): 1.20MM
• Hard steel hrc30 (hard): 1.00mm
• Hard steel hrc40 (hard): 0.60mm
• Stainless steel 304:0.90           

Features and Benefits

• Positive locking mechanism
• Two blade position 90D/55D
• Aluminium handle - 12" blades

• Handle offers a square/mitre feature with 45D and 90D angles
• Contoured sturdy handle designed for comfort and control condolences
• Full length protective sleeve
• Contents: 6T/7PT 18"
• Tooth pattern: Crosscut

Features & Benefits

• Handle offers a square/mitre feature with 45D and 90D angles
• Contoured sturdy handle designed for comfort and control condolences
• Full length protective sleeve
• Contents: 6T/7PT 20"
• Tooth pattern:Crosscut

Features & Benefits

• Handle offers a square/mitre feature with 45D and 90D angles
• Contoured sturdy handle designed for comfort and control condolences
• Full length protective sleeve
• Contents: 6T/7PT 22"
• Tooth pattern: Crosscut

• 26 strand 12mm wide blade
• 2 colour graduations - easy to read in all conditions
• High impact, high visibility yellow ABS case
• Handle folds for storage
• Class III Accuracy
• Description: Long tape closed F/G
• Blade length: 30m (100ft)
• Blade width: 13mm (1/2")

• 26 strand 12mm wide blade
• 2 colour graduations - easy to read in all conditions
• High impact, high visibility yellow ABS case
• Handle folds for storage
• Class III Accuracy
• Blade length: 50m (165ft)
• Blade width: 13mm (1/2")

• Rewinds 3X faster than 34-900 Stanley® Long Tape with 3:1 gear drive
• 40 fiberglass strands for strength and durability
• 1/2" wide blade for easy readability
• 2-sided blade graphics with fractional inch/decimal foot scales for versatility
• Polymer-coated blade withstands abrasion
• High-impact ABS case with durable rubber grip holds up to heavy use
• Blade bumper to help prevent blade damage

• 26 strand 12mm wide blade
• PVC blades allow wound wet and easily cleaned
• Metric English blade printed both sides
• Bi-material handle and shaped winder for ease of use
• Class III Accuracy
• High-impact ABS case withstands rugged conditions
• Blade length: 30m (100ft)
• Blade width: 13mm (1/2")

• 1/2" wide blade with easy-to-read markings
• 2-sided blade graphics with fractional inch/decimal foot scales
• Polymer-coated blade withstands abrasion
• High-impact ABS case with durable rubber grip holds up to heavy use
• Corrosion-resistant Tru-zero folding end hook for accurate measurements

• 26 strand 12mm wide blade
• PVC blades allow wound wet and easily cleaned
• Metric English blade printed both sides
• Bi-material handle and shaped winder for ease of use
• Class III Accuracy
• High-impact ABS case withstands rugged conditions
• Blade length: 60m (200ft)
• Blade width: 13mm (1/2")

• Box Section Level For DIY
• Lightweight aluminium box section body
• 2 plumb, 1 horizontal vial, permanently fixed
• easy to clean epoxy finish to all surfaces
• Accurate to 1.0mm/m
• Length: 300mm (12")
• Of vials: 2-level/plumb

• Box section level for the DIY
• Lightweight aluminium box section body
• 2 plumb, 1 horizontal vial, permanently fixed
• Easy to clean epoxy finish to all surfaces
• Accurate to 1.0mm/m
• Length: 915mm (36")

• Aluminium body
• 3 tubular vials:
• 1 x top read level vial
• 1 x plumb vial
• 1 x 180° rotating angle vial (double graduation for 0° up to 90° and in 10° increments)
• Shock absorbing end caps
• Accuracy of +/- 1.5mm/m

• Aluminium body
• 3 tubular vials:
• 1 x top read level vial
• 1 x plumb vial
• 1 x 180° rotating angle vial (double graduation for 0° up to 90° and in 10° increments)
• Shock absorbing end caps
• Accuracy of +/- 1.5mm/m

• Solid block center vial magnified for easier reading and accurate to 0.0005"/in and 0.5mm/m
• Enlarged plumb vials over 25% larger than standard vials for easy reading
• Plumb vials feature clear covers for protection and easy cleaning
• Shock-absorbing end caps protect level
• New concave body design provides durability and comfortable handling
• Length: 60cm
• Of vials: 2

• Embossed graduations and figures on work-hardened steel
• Metric roofing table
• Buffed finish with a clear lacquer that resists rust
• Body length: 600 x 50mm
• Tongue length: 400 x 8mm
• Graduation: Face (2mm) Back (2mm)

• Fiberglass shaft with polypropylene outer jacket
• Tape lock union between head and shaft for safety
• Flock-filled rubber grip impervious to heat
• Meets ANSI standards
• Improved handle design for greater comfort & control
• Head length: 335mm (13 1/4")
• Weight: 450gm (16oz)

• The hammer head is attached with 2 wedges for better durability
• Ball end use for riveting and poll used for normal striking
• Meets ANSI standards
• Handle 25% longer in 16 - 302oz sizes for better balance and control
• Head length: 355mm (14")
• Weight: 450gm (16oz)

• Interchangeable bars maximize versatility
• Reduces the number of tools user needs to carry
• Tip Type Multi-Bit
• Includes
• 1/8" Standard Bar
• 3/16" Standard Bar
• 1/4" Standard Bar
• 0pt Phillips® Bar
• 1pt Phillips® Bar
• 2pt Phillips® Bar
• 1 Tack Puller
• 1 Brad Awl
• 1 Hook Driver
• Handle
• Storage case included

• Solid steel wheel with one meter circumference
• Heavier weight for more rugged applications
• Solid wheel to stop brush or branches jamming it
• Exact metric counter for accuracy
• Large easy to read numbers
• Displays metre and centimetre measurements up to 10,000 metres
• Impact resistant housing prevents damage plus large easy to use reset lever
• Positive handle latch - Easy to operate in all weathers and with gloves, makes going from storage to operation easy and fast
• Brake protection for long life
• Easy to use spring loaded brake prevents movement from known point
• Secure on uneven surfaces and prevents fatigue and saves time
• Steel frame with powder coat finish for strength and protection against rust and corrosion

• Stanley 4" Bench Vise Cast Steel Body Chromed Handle Short Screw Sationary base Clamping force up to 2500kgs.
• Better performance
• better than Iron
• Lightweight compared to Iron
• Size: 4"
• Jaw max opening: 4"/4"
• Throat depth 2-1/4"

• Ball bearing slide with quick disconnect
• Double wall construction with heavy duty metal side handle to provide ultimate durability
• Full-length drawer pulls with liners and top vinyl mat includes
• Heavy duty 5”x2” casters and easy grip cabinet side handle for better mobility

• 4 Drawers roller cabinet
• Overall dimension 698 x 477 x 973mm (W x D x H)
• Drawer dimension 560 x 410 x 75.5mm (W x D x H)
• Load capacity of top tray is 30kg, every drawer is 25kg, and bottom is 35kg
• Plastic top tray to organize tools.
• Comes with folding tray.
• Lockable wheel with Rubber Castor.
• Concave on both side to hold more tools.
• Bumper rubber on corners to prevent scratching

• 2 speed gearbox: 0-400/0-1600 rpm
• New contoured overmold grip and LED work light for user convenience
• Battery fuel gauge indicates the remaining power

• High performance transmission deliver 0-3100 bpm for quick fastening applications
• Quick load chunk makes bit replacement easier for user
• Battery fuel gauge displays remaining power.
• LED work light provides better visibility

• Ergonomically Shaped for easy one hand operation
• 550W Powerful motor suitable for aluminium tapping and hard wood drilling
• Long durable dust-proof ball bearing and sipport bearing system contribute longer durability
• Forward/reverse control variable speed dial offers convenient and accurate speed and torque settings for specified application.

• Easy twist tool-free blade change
• Tooled shoe adjustment
• Variable speed trigger
• Power 900W
• Strokes/min 0-3200spm
• Stroke Length 148mm
• Weight 3.2kg

• POWER: 720 W
• CHUCK SIZE :22 MM
• MODE :3
• NO. LOAD SPEED :0-980 RPM
• BLOW/MIN :0-5,200 BPM
• LOCK-ON SWITCH :YES
• VARIABLE SPEED :NO

• - 12 position dial (At 0.2mm increments for increased accuracy).
• - Left & right dust extraction (Can be used in any direction with effective dust extraction).
• - Improve dust bag design (Easy-fit and enhanced dust entrapment).
• - 3 chamfer grooves (Different sized grooves to maximise versatility).
• - Increase rebate cut (12mm maximum depth of cut)

• High Torque 2100w motor provides high performance and long durability
• Ergonomic design for good handling and less user fatigue
• Heavy duty guard for maximum user protection

• On/off toggle switch offers longer working time
• Accessible brush for easy replacement
• Full rubber protection on front housing for increased comfort

• Brand Stanley
• Input Power 580W
• Voltage 220V ~ 240V
• Disc Capacity 100mm
• Switch Tongle
• No Load Speed 12,000 RPM
• Weight 1.55KG

• Powerful motor for all job-site chipping & chiseling applications
• Class leading durability, egonomics & performance
• Free 5 pc of Stanley Chisel

• 2 Finger switch for long duration fatigue free usage
• 2 modes: Hammer drilling and chiseling
• Carbon brush access caps for easy access and quick change
• Heavy duty type kit box for safe storage under job-site conditions
• L-Shape design provides compact and slim line tool to maximise control
• Safety clutch eliminates sudden high-torque reaction should the bit jam
• Side handle for easy 2 hand operation
• Textured handle grip for long duration easy usage
• With 4.1J of impact energy specially designed to deliver ultimate drilling and chipping power

• 30m range
• Ideal for DIY use
• Estimate required materials quickly and accurately
• Addition / subtraction calculator
• Easy to take measurements in out of reach areas

• 5 memory storage function
• Addition / subtraction calculator
• Backlit 2 line display
• Includes storage pouch
• Increased 50m range
• Toe end piece for accurate positioning

Stanley STHT33463-8 10m/33ft PowerLock Measuring Tape

High impact chrome ABS case for tough onsite jobs Mylar polyester film extends

life of entire blade Corrosion-resistant

Tru-Zero end hook for accurate measurements Blade

Length:10m/33' x 25mm Blade Width :

10m/33' 25mm Blade Printing: 1-sided Blade Graphics:

Regular Blade Coating :Mylar Yellow

Stanley STMT74157-8 135 PCS TOOLS SET WITH ROLLER CABINET

ROLLER CABINET, MODEL: 99-069 + ACCESSORIES (135PCS) + FOAM CUT 
SKU# STMT74157-8
 

• Jaws fully hardened and tempered
• 25% more torque
• For holding on fastening nuts and bolts
• Rust resistant finish
• Length: 15" (375mm)

• Lock-on button for one hand control and user safety
• 600W powerful motor for higher tool performance
• 2 Tools in 1: Blower and vacuum cleaner
• Light and compact design for ease of handling
• Optimized fan structure for better air flow
• Variable speed option for easy control of airflow
• Rubber nozzle for greater flexibility during work
• Suction mode used in restricted application areas

• Unique on-board storage design for all accessories
• Powerful 1400W motor
• 100 Bar Max Pressure
• With handle & wheel for easy carrying
• Cast aluminum pump for improved durability
• Auto Stop System

•  Unique on-board storage design for all accessories
•  Powerful 18ooW motor
•  140 bar max pressure
•  With handle & wheel for easy carrying
•  Cast aluminum pump for improved durability Auto Stop System
•  Accessories for STPW1800 include:
•  Sm high pressure hose, variable nozzle, rotating nozzle, fixed brush, soap bottle, quick connect adaptors

• 1,320W powerful motor improves productivity
• Optimized gear set produces & improves lifespan of tool
• Optimized 13,000rpm for high cutting effciency
• Textured handle grip for easy extended usage

Stanley STST93328 20" Open Mouth Wheeled Tool Storage Box Bag

• Drop-forged carbon steel material, hardened, tempered, grown, glazed & tested to last
• Cold-rolled steel: 0.78
• Stainless steel: 0.45
• Size: 10"

• The Hammer head is attached with 2 wedges for better durability
• Natural hardwood handle
• Meets ANSI tandards
• Hammer claws 15% longer for greater ease in pulling nails
• Head length: 330mm (13")
• Weight: 450gm (16oz)