Fluke 101 Basic Digital Multimeter Pocket

Product details of Fluke 101 Basic Digital Multimeter Pocket

AC (40Hz-500Hz)/DC Voltage---Range:6V, 60V, 600V; Resolution: 0.001V, 0.01V, 0.1V; Accuracy:1%+3(AC), 0.5%+3(DC)

Resistance ---Range:400.0 Ω, 4.000 kΩ, 40.00 kΩ,400.0 kΩ,4.000 MΩ,40.00 MΩ; Resolution: 0.1 Ω, 0.001 kΩ, 0.01 kΩ,0.1 kΩ,0.001 MΩ,0.01 MΩ; Accuracy:0.5 % + 3,0.5 % + 2,0.5 % + 2,0.5 % + 2,0.5 % + 2,1.5% + 3

Capacitance ---Range:50.00 nF,500.0 nF, 5.000 μF,50.00 μF,500.0 μF,1000 μF; Resolution: 0.01 nF, 0.1 nF, 0.001 μF,0.01 μF,0.1 μF,1 μF; Accuracy:2 % + 5,2 % + 5,5 % + 5,5 % + 5,5 % + 5,5 % + 5

Frequency (10Hz-100KHz) ---Range:50.00 Hz,500.0 Hz, 5.000 kHz,50.00 kHz,100.0 kHz; Resolution:0.01 Hz, 0.1 Hz, 0.001 kHz,0.01 kHz,0.1 kHz; Accuracy:0.1 % + 3

Warranty： one year

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Data hold

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

 Fluke 113 Digital Multimeter

• VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
• True-rms for accurate ac measurements on non-linear loads
• A large backlit display allows for easy visibility in low-lit areas
• Record signal fluctuations using the Min/Max function
• Diode test for testing general-purpose germanium, silicon, and power diodes
• Integral holster with probe holders for easy storage
• Auto and Manual ranging for added user functionality
• Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
• The optional TPAK magnetic hanger allows the user hands-free flexibility

• AutoVolt: automatic ac/dc voltage selection
• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Min/Max/Average to record signal fluctuations
• CAT III 600 V safety rated

• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Frequency and capacitance
• Maximum Voltage ac/dc 600V
• 10A ac/dc current measurement (20 A overload for 30-seconds max)
• Min/Max/Average to record signal fluctuations
• CAT III 600 V safety rated

• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™)
• CAT III 600 V safety rated

• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads
• Measures 10 A (20 A overload for 30-seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™) for hands free operation
• CAT III 600 V safety rated

• Insulation test range:
• 1507: 0.01 MΩ to 10 GΩ
• 1503: 0.1 MΩ to 2000 MΩ
• Insulation test voltages:
• 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
• 1503: 500 V, 1000 V
• Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)
• Make repetitive tests simple and easy with the 1507’s Compare (Pass/Fail) function (only available on the 1507)
• Repetitive or hard-to-reach testing is easy with the remote test probe
• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user protection
• AC/DC voltage: 0.1 V to 600 V
• 200 mA Continuity
• Resistance: 0.01 Ω to 20.00 kΩ
• Save battery power with auto power off
• Read measurements easily with large, backlit display
• CAT IV 600 V overvoltage category rating for added user protection
• Remote probe, test leads, probes and alligator clips included with each tester
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
• One year warranty

• Insulation test range:
• 1507: 0.01 MΩ to 10 GΩ
• 1503: 0.1 MΩ to 2000 MΩ
• Insulation test voltages:
• 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
• 1503: 500 V, 1000 V
• Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)
• Make repetitive tests simple and easy with the 1507’s Compare (Pass/Fail) function (only available on the 1507)
• Repetitive or hard-to-reach testing is easy with the remote test probe
• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user protection
• AC/DC voltage: 0.1 V to 600 V
• 200 mA Continuity
• Resistance: 0.01 Ω to 20.00 kΩ
• Save battery power with auto power off
• Read measurements easily with large, backlit display
• CAT IV 600 V overvoltage category rating for added user protection
• Remote probe, test leads, probes and alligator clips included with each tester
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
• One year warranty

 Fluke 1550C 5kv Insulation Resistance Testers

• Test voltages up to 10 kV provides solutions for all applications
• CAT III 1000 V, CAT IV 600 V safety rating
• Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
• Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2TΩ
• Timer settings up to 99 minutes for timed tests

• Test voltages up to 10 kV provides solutions for all applications
• CAT III 1000 V, CAT IV 600 V safety rating
• Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
• Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2TΩ
• Timer settings up to 99 minutes for timed tests

 Fluke 1555 10kv Insulation Resistance Testers

• Test voltages up to 10 kV provides solutions for all applications
• CAT III 1000 V, CAT IV 600 V safety rating
• Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
• Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2TΩ
• Timer settings up to 99 minutes for timed tests

• Test voltages up to 10 kV provides solutions for all applications
• CAT III 1000 V, CAT IV 600 V safety rating
• Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
• Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2TΩ
• Timer settings up to 99 minutes for timed tests

• The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
• Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

• The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
• Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

• The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications.
• Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1% - 3% of revenue (potentially 30% - 40% of profits) annually.
• Includes a Fluke 1587 Insulation Multimeter, Fluke i400 Current Clamp, and a Fluke 62 Mini Infrared Thermometer.
• With the Fluke 1587, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease.
• Use the Fluke i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit.
• Check for hot spots and measure temperature with the Fluke 62 Mini non-contact thermometer.

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

 Fluke 1621 Digital Earth Ground Tester

• 3-pole Fall-of-Potential earth testing for basic measurements
• 2-pole resistance measurements for added versatility
• Easily capture values with single-button operation
• Ensure accurate measurements with automatic ‘noise’ voltage detection
• Hazardous voltage warning offers increased user protection
• Clearly read and record data with a large, backlit display
• Rugged holster and design for tough work environments
• Portable size allows for easy transportation
• Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting
• 600 V Cat II

• 3-pole Fall-of-Potential earth testing for basic measurements
• 2-pole resistance measurements for added versatility
• Easily capture values with single-button operation
• Ensure accurate measurements with automatic ‘noise’ voltage detection
• Hazardous voltage warning offers increased user protection
• Clearly read and record data with a large, backlit display
• Rugged holster and design for tough work environments
• Portable size allows for easy transportation
• Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting
• 600 V Cat II

• The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.
• Fluke 1623-2 GEO Earth Ground Tester summary
• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

• One-button measurement concept
• 3- and 4-pole earth ground measurement
• 4-pole soil resistivity testing
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Measuring frequency 128 Hz

• 3- and 4-pole earth ground measurement
• 4-Pole soil resistivity testing
• 2-pole resistance measurement AC
• 2- and 4-pole resistance measurement DC
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Earth impedance measurement at 55 Hz
• Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
• Measuring voltage switchable 20/48V
• Programmable limits, settings
• Continuity with buzzer

• 4-pole earth ground measurement
• 4-pole soil resistivity testing
• 2-pole resistance measurement AC
• 2- and 4-pole resistance measurement DC
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Earth impedance measurement at 55 Hz
• Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
• Measuring voltage switchable 20/48V
• Programmable limits, settings
• Continuity with buzzer

• A wide ground loop resistance range, from 0.025 Ω to1500 Ω, to satisfy all requirements
• Large jaw opening of 35 mm (1.38 in) for tests on ground conductors and/or equipotential bus bars
• Measurement of ground leakage current, from 0.2 mA to 1000 mA, without needing to disconnect - ideal for system troubleshooting
• Wide AC current measurement range from 0.2 A to 30 A allows one instrument for multiple applications
• User-defined HI / LO Alarm limits, for rapid measurement evaluation
• Handy ‘display hold’ button for capturing readings in hard-to-reach places
• Time saving memory function automatically records and stores measured values
• Automatic self calibration ensures correct measurement every time
• Overload protection: 200 A
• Carrying case and resistance test loop included
• ≥ 8 hours battery life (continuous operation)

 Fluke 175 Digital Multimeter

• True RMS voltage and current measurements
• 6000 count resolution
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Min-max-average recording
• Smoothing mode allows filtering of rapidly changing inputs
• Easy battery exchange without opening the case
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster
• EN61010-1 CAT III 1000V / CAT IV 600V
• Measures twice as fast as other multimeters

 Fluke 177 True-rms Digital Multimeter

• True RMS voltage and current measurements
• 0.09% basic accuracy
• 6000 count resolution
• Digital display with analog bargraph and backlight
• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Min-max-average recording
• Smoothing mode allows filtering of rapidly changing inputs
• Easy battery exchange without opening the case
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster
• EN61010-1 CAT III 1000V / CAT IV 600V
• Measures twice as fast as other multimeters

• Manual and automatic ranging
• Display Hold and Auto Hold
• Frequency and capacitance measurements
• Resistance, continuity and diode measurements
• Temperature measurements (179)
• Min-max-average recording
• Closed case calibration through front panel
• Ergonomic case with integrated protective holster

• We know industrial electricians work in tough environments, that's why we have kitted our Fluke 179 True RMS digital multimeter with industrial strength test lead probe kit in a compact lightweight soft case. This kit includes AC220 SureGrip™, Alligator Clips TP220 SureGrip™, Test Probes, TL224 SureGrip™, Silicone Test Leads and ToolPak, magnetic meter-hanger backed by a limited lifetime warranty on the multimeter, and 1-year on all accessories.

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Over-voltage indicator
• Frequency and temperature measurement
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

• Voltbeat™ technology and continuous self-test – so you always know it's working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Expanded range: 90 V AC to 1000 V AC
• 20 V to 90 V AC control circuit model also available
• Two-year warranty
• Batteries included
• On/Off Button
• Audible/Silent

• Voltbeat™ technology and continuous self-test – so you always know it's working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Expanded range: 90 V AC to 1000 V AC
• 20 V to 90 V AC control circuit model also available
• Two-year warranty
• Batteries included
• On/Off Button
• Audible/Silent

 Fluke 2042 Cable Lacator

• For all applications (live or dead cables) without additional instruments
• Set includes a transmitter and a receiver
• Proven digitally coded sender signal guarantees clear signal identification
• Transmitter with LC-display for transmitting level, transmitting code and external voltage
• Receiver with a backlight LC-display for level of receiving signal, code of receiving signal and live voltage indication
• Automatic or manual adjustment of receiving signal sensitivity
• Acoustical receiving signal switchable
• Auto-Power-Off
• Additional torch lamp function for working in dark environments
• Additional transmitters are available for extension of to distinguish between several signals

• True RMS AC voltage and current for accurate measurements on non-linear signals
• Measure up to 1000 VAC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 50 kHz
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity and diode test
• Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
• The removable magnetic display can be conveniently mounted where it is easily seen
• Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
• Use as a conventional multimeter when the display is connected
• Radio transmitter automatically turns off when the display is connected to the meter
• Auto power off maximizes battery life
• Min/Max and Average recording to capture variations automatically
• Test continuity and diodes
• Easy to read display with large digits and bright backlight
• Battery life approximately 400 hours

• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth– 15 Hz to 20 kHz
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• Hi resolution 20,000 count display mode
• True-rms ac voltage and current for accurate measurements on non linear signals
• New – Backlit keypad buttons allow for easy visibility in lowlit areas
• Large display digits and 2 level bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
• MSHA approval

 Fluke 287 True-RMS Electronics Logging Multimeter

• Equipped with new functionality
• NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
• NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
• TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• On board help screens for measurement functions.
• Saved measurements allow you to name and recall measurements made in the field.
• Multi-lingual interface.
• Multiple logging sessions possible without download.
• 0.025% basic DC accuracy.
• 100 kHz AC bandwidth.
• Real time clock for automatic time stamping of saved readings.
• True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Temperature function.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements.
• Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
• Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.
   

• Equipped with new functionality
• NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
• NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
• TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• On board help screens for measurement functions.
• Saved measurements allow you to name and recall measurements made in the field.
• Multi-lingual interface.
• Multiple logging sessions possible without download.
• 0.025% basic DC accuracy.
• 100 kHz AC bandwidth.
• Real time clock for automatic time stamping of saved readings.
• True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Temperature function.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements.
• Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
• Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.
   

• NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
• NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
• TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• Save multiple logging sessions before PC download is necessary.
• Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
• Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
• LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
• On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
• Real time clock for automatic time stamping of saved readings.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements.
• True-RMS AC voltage and current for accurate measurements on non-linear signals.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
• Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
• .

• NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
• NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
• TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
• Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
• Save multiple logging sessions before PC download is necessary.
• Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
• Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
• LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
• On board help screens for measurement functions. Unsure about a function - go to that function and press the "i" button.
• Real time clock for automatic time stamping of saved readings.
• Relative mode to remove test lead resistance from low ohms or capacitance measurements.
• True-RMS AC voltage and current for accurate measurements on non-linear signals.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.
• Peak capture to record transients as fast as 250 μs.
• Premium test leads and alligator clips included.
• Amp jack plugs included.
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
• FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.

Fluke 289V Advanced data logging Multimeter

• Trendcapture: Record, graph and review measurements in the field
• Large 50,000 count, ¼ VGA display with white backlight
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• LoZ Volts. Low impedance voltage function prevents false readings due to "ghost" voltage
• 50 ohm range – useful for measuring and comparing differences in motor winding resistance

Fluke i400 AC 400A Current Clamp

• Companion to your DMM to measure up to 400 A AC
• 1 mA/Amp output guarantees easy reading on you meter
• Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
• Specially designed to offer maximum utility in a very compact shape

Fluke 303 Compact AC Clamp Meters 

• 600 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Resistance range of 40 kΩ
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

• · 999.0 A ac current measurement
• · Cat IV 300V / CAT III 600V safety rated
• · 30 mm jaw size for numerous applications
• · Resistance range of 40 kΩ
• · Slim, ergonomic design is easy to carry and simple to use
• · Easy to read backlight display

• · Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution
• · Small body and jaws fit perfectly in your hand and into tight places
• · Large, backlit display is easy-to-see in less than ideal conditions
• · In-rush current function (319) for measuring starting current for motors, lighting, etc.
• · Measuring current Frequency (319)
• · Resolution up to 0.01A and 0.1 V
• · Measures AC/DC current to 1000 A (319)
• · Measures AC/DC volts to 600 V
• · Resistance measurement to 4000 Ω
• · Continuity for quick checking of shorts
• · Auto-shut-off maximizes battery life so the meter works when you need it
• · Display hold function
• · One year warranty

•  Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution
• · Small body and jaws fit perfectly in your hand and into tight places
• · Large, backlit display is easy-to-see in less than ideal conditions
• · In-rush current function (319) for measuring starting current for motors, lighting, etc.
• · Measuring current Frequency (319)
• · Resolution up to 0.01A and 0.1 V
• · Measures AC/DC current to 1000 A (319)
• · Measures AC/DC volts to 600 V
• · Resistance measurement to 4000 Ω
• · Continuity for quick checking of shorts
• · Auto-shut-off maximizes battery life so the meter works when you need it
• · Display hold function
• · One year warranty

• · 400 A ac current measurement
• · 600 V ac and dc voltage measurement
• · True-rms ac voltage and current for accurate measurements on non-linear signals
• · Resistance measurement up to 40 kΩ with continuity detection
• · Slim, ergonomic design
• · CAT IV 300V/CAT III 600 V safety rating
• · Hold button
• · Two-year warranty
• · Soft carrying case

• · 400 A ac current measurement
• · 600 V ac and dc voltage measurement
• · True-rms ac voltage and current for accurate measurements on non-linear signals
• · Resistance measurement up to 40 kΩ with continuity detection
• · Slim, ergonomic design
• · CAT IV 300V/CAT III 600 V safety rating
• · Hold button
• · Two-year warranty
• · Soft carrying case

• Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

Fluke 365 Detachable Jaw Clamp Meter

• 200 A ac and dc current measurement with detachable jaw
• 600 V ac and dc voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

• iFlex flexible current probe (sold separately) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
• CAT IV 600 V, CAT III 1000 V
• Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing personal protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

• iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
• CAT IV 600 V, CAT III 1000 V
• True-rms ac voltage and current for accurate measurements on non-linear signals
• 500 mV dc measurement range to interface with other accessories
• Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case

• iFlex flexible current probe expands the measurement range to 2500 A ac
• CAT IV 600 V, CAT III 1000 V
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Min, max, average and inrush recording to capture variations automatically
• Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Soft carrying case

 Fluke 414D 50m Laser Distance Meter

• The most advanced laser technology for distance measurement
• Simple one-button operation to instantly measure distance between two objects
• Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
• Bright laser for easy targeting even at longer distances
• Quick calculation of area (square feet/meters) and volume
• Easy addition and subtraction function
• Pythagoras function indirectly measures height via two other measurements
• Stores up to five measurement results
• Battery life of 3000 measurements with automatic shut-off feature
• Two-line display with display hold (until next button is pressed)
• Carrying pouch secures to your tool belt
• Powered by two AAA batteries

 Fluke 419D 80m Laser Distance Meter

• Measure up to 80 m (260 ft)
• Higher accuracy: +/-1 mm (0.04 in)
• View more data with backlit, three-line display
• Full Pythagoras function for height measurements
• Storage of 20 complete displays for quick recall
• Audible keypad feedback
• Minimum/Maximum function
• Tripod mode for mounting meter on a tripod when measuring long distances
• Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
• Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point.
• Enhanced environmental protection:IP54-rated as dust and water spray resistant
• Improved battery life of 5000 measurements with auto laser off and auto power off features.

• Measures up to 100 m (330 ft)
• Higher accuracy: +/-1 mm (0.04 in)
• 4-line display shows you even more data at a glance
• Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle
• Corner angle feature, allows you to determine the angle of a corner
• Compass provides a "heading" for your distance measurements
• Stores 20 complete displays for quick recall
• Backlight
• Tripod mode allows you to mount the meter to a tripod when measuring long distances
• Full Pythagoras function for height measurements
• Audible keypad feedback
• Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
• Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point
• Minimum/Maximum function
• Enhanced environmental protection:IP54-rated as dust and water spray resistant
• Improved battery life of 5000 measurements with auto shut-off feature

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation.

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation.
• 3 year warranty
• Large backlit dual display shows any combination of T1, T2 (52 and 54 only), T1-T2 (52 and 54 only), plus MIN, MAX, or AVG.
• RPM measurements with optional inductive pickup
• Temperature measurements with optional temperature probe

 Fluke 54-2B Infrared Thermometer

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation.
• 3 year warranty

• IR thermometer for quick measurements up close or at a distance, without a ladder
• Compatible with all standard mini-connector K-type thermocouples
• Velcro pipe probe for superheat, sub-cooling or other contact and ambient measurements
• Single-point laser sighting
• Temperature range optimized for HVAC/R applications
• Easy emissivity adjustment for measuring pipes and ducts more accurately
• Lightweight (only 340 grams (12 ounces)) and portable
• Very easy to use
• Efficient – no need to shut down equipment when making IR measurements
• MIN, MAX and DIF temperature readings help you quickly identify problems
• Scan large areas or small objects quickly and efficiently
• HVAC/R measurement guide included to maximize your productivity

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments
• Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built-in material table
• Capture multiple points of data (up to 99 with the 568, and 20 with the 566), for downloading and recalling later
• Easily adapt to lighting conditions with 2 levels of backlight
• Audible and visual alarms instantly alert you to measurements outside of your set limits
• Quickly identify problems with the MIN, MAX, AVG, and DIF functions
• Make contact thermometer measurements right away with the included Type-K thermocouple bead probe
• Confidently troubleshoot equipment with 1 % measurement accuracy
• Versatile interface with 6 languages from which to choose

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments
• Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built-in material table
• Capture multiple points of data (up to 99 with the 568, and 20 with the 566), for downloading and recalling later
• Easily adapt to lighting conditions with 2 levels of backlight
• Audible and visual alarms instantly alert you to measurements outside of your set limits
• Quickly identify problems with the MIN, MAX, AVG, and DIF functions
• Make contact thermometer measurements right away with the included Type-K thermocouple bead probe
• Confidently troubleshoot equipment with 1 % measurement accuracy
• Versatile interface with 6 languages from which to choose

• Precise laser technology for more accurate and repeatable measurements
• Large, easy-to-read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box
• 10:1 distance to spot ratio 
• IP40 rated for extra protection against airborne contaminants
• Displays the minimum, maximum or average temperature, or the difference between two measurements
• Hi and Lo alarms for rapid display of measurements outside the limits
• Powered by one (1) AA battery
• One year warranty

• Precise laser technology for more accurate and repeatable measurements
• Large, easy-to-read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box
• 10:1 distance to spot ratio 
• IP40 rated for extra protection against airborne contaminants
• Displays the minimum, maximum or average temperature, or the difference between two measurements
• Hi and Lo alarms for rapid display of measurements outside the limits
• Powered by one (1) AA battery
• One year warranty

• Bright laser beam provides easy targeting
• Display clearly supplies data at a glance
• Shock-absorbing holster increases ruggedness
• 0.2 °C (0. 5 °F) resolution
• Backlight illuminates the screen in the dark
• Automatic sleep mode after 7 seconds extends battery life
• Alkaline batteries provide 4000 typical measurements
•  

• Expanded measurement range up to 535 °C (999 °F)
• High-resolution optics
• High accuracy: 1 % and repeatability: 0.5 %
• MAX temperature display
• Laser targeting
• Backlit display

• Large display
• Backlight for work in dim areas
• Min / Max to record signal fluctuations
• Ergonomic overmolded housing with integrated probe holders
• Free your hands with the optional TPAK magnetic hanger
• Auto and Manual ranging
• Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
• Wide 1000 V measurement range
• Average responding AC measurements
• 0.3% accuracy
• 10 Amps continuous (20A for 30 seconds)
• Frequency and capacitance
• Resistance and continuity

• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
• Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models

• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
• True RMS AC voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 0.05% DC accuracy
• 6000 counts, 3-3/4 digits
• 4-1/2 digit mode for precise measurements (20,000 counts)
• Measure up to 1000 VAC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (TC probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without breaking the calibration seal
• "Classic" design with new removable holster with built in test lead and probe storage
• Lifetime warranty
• Electrical safety

• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
• Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models

 Fluke 88V Deluxe Automotive Multimeter

• Resistance, continuity and diode test
• Millisecond pulse width measurements for fuel injectors
• Frequency to 200 kHz and % duty cycle
• Measure up to 1000 V AC and DC
• Measure current up to 10 A, 20 A for up to 30 seconds
• 4 ½ digits for precise measurements
• RPM measurements with optional inductive pickup
• Temperature measurements with optional temperature probe
• 0.1% DC accuracy
• Current measurements up to 10 A, 20 A for up to 30 seconds
• Millisecond pulse width measurements for fuel injectors
• Optional magnetic hanger allows meter to attach to the vehicle and free your hands for other tasks
• Min/Max/Average recording with Min/Max Alert to capture variations automatically
• Peak Min/Max to record transients as fast as 250 μs
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Autohold™ to capture stable readings with only one touch of the leads
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph to track changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Access door for fast battery changes without opening up the case
• "Classic" design that fits your hand with new removable holster, built-in test lead and probe storage
• 10 meg ohm input impedance won’t damage computer circuits
• Limited lifetime warranty

 Fluke 88V/A Automotive Multimeter Combo Kit

• Lifetime warranty
• 6000 counts, 3-3/4 digits
• Measure up to 1000 V AC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (temperature probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup
• Millisecond pulse width measurements for fuel injectors
• Magnet hanger to attach meter to the vehicle and free your hands for other tasks
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without opening up the case
• "Classic" design with new removable holster with built in test lead and probe storage
• 10 meg ohm input impedance wont load circuits
• 0.1% DC accuracy

Fluke 902 True RMS HVAC Clamp Meter

• Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements
• Small body and jaws fit perfectly in your hand and into tight places
• Handy 'Display Hold' button keeps measurements on the display
• Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch)
• Large, backlit display is easy-to-see in less than ideal conditions
• Auto shut-off maximizes battery life so the meter works when you need it
• Three year warranty

• Powerful meter provides differential and static pressure, air velocity and flow readings
• Convenient colored hoses help proper interpretation of pressure readings
• Easy to use without sacrificing performance
• Bright, backlit display for clear viewing in all environments
• User-defined duct shape and size for maximum airflow accuracy
• Resolution down to 0.001 inH2O
• 99 point data storage capacity
• Min/Max/Average/Hold functions for easy data analysis
• Auto power off saves battery life

 Powerful meter provides differential and static pressure, air velocity and flow readings

· Convenient colored hoses help proper interpretation of pressure readings

· Easy to use without sacrificing performance

· Bright, backlit display for clear viewing in all environments

· User-defined duct shape and size for maximum airflow accuracy

· Resolution down to 0.001 in H2O

· 99 point data storage capacity

· Min/Max/Average/Hold functions for easy data analysis

· Auto power off saves battery life

Fluke 931 Contact and Non-Contact Dual-Purpose Tachometers

Made in : Germany

Brand : Fluke

1 Year Warranty

Features :

•6-digit backlight display reads the data clearly

•Signal detection reminder avoids invalid detection actions

•Maximum/minimum/average value and final readings

•Setting/Turning off the automatic power-off function

•Small size and easy to hold

•Easy switching of the contact and non-contact measurement modes

•Different speed measuring heads and rotational speeds adapt to different measurement occasions

Rotation speed measurement:

Range:

Optical (non-contact) measurement: 1 to 99999 revolutions/minute

Contact measurement: 1 to 19999 revolutions/minute (Fluke 931 only)

Precision:

±0.02%RD+1

Sensing distance(optical):

500 mm 

Specifications:

Battery type:

(2) 1.5V LR6 (alkaline) AA battery

Battery life:

About 40 hours

Operating temperature:

0°C to 50°C

Storage temperature:

-20°C to 70°C

Weight:

250 g

Dimensions:

175 × 60 × 28 mm

• Backlit dual display of humidity and temperature
• Measures dew point and wet bulb temperatures
• 99 record storage capacity
• Ergonomic design with belt clip and protective holster
• Quick-response capacitance sensor
• Compact and lightweight (188 g /6.6 oz)
• Temperature range from -20°C to 60°C (-4°F to 140°F)
• Relative humidity from 5% to 95%
• Min/Max/Avg Data hold
• Low battery indicator

• ·         Simultaneously measures, logs, and displays temperature, humidity, CO2, and CO on a bright, backlit LCD display
• ·         One-touch air flow and velocity with available probe*
• ·         Wet bulb and dew point temperature
• ·         % of outside air calculation
• ·         CO2 and CO field calibration feature
• ·         Self-test function at startup
• ·         Auto-backlight
• ·         Automatically compensates for barometric pressure changes
• ·         Min/Max/Average on all measured and calculated readings
• ·         Multi-language user interface
• ·         Metric or standard units
• ·         Audible and visual threshold alarms
• ·         Extensive discrete or continuous data logging capacity, downloadable to PC via USB interface
• ·         Keypad lock for security
• ·         Included FlukeView Forms® software

• Sample flue gas with your Fluke CO-210 or CO-220 using the CO-205 Aspirator Kit
• Draw flue gas samples up to 700ºF (370ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.
• The CO-205 aspirator accessory kit contains all the components necessary to provide a clean sample for the Fluke family of gas measuring devices.

• Rugged case and electronics
• Large LCD displays CO levels from 0 to 1000 ppm
• Bright back-light allows easy screen viewing under dim lighting conditions
• Beeper triggers with increasing frequency as CO levels rise
• MAX Hold function stores and displays the maximum CO level
• Automatic sensor zeroing and self-test sequence upon start-up
• CO level beeper can be silenced if desired
• Automatic power-off after 20 minutes extends battery life
• Easy to replace battery
• Replaceable sensor extends tool life
• C50 soft carrying case, battery and instruction sheet
• Stabilized electrochemical CO specific sensor
• Typical three year sensor life; one year calibration cycle
• Battery life typical 500 hours with alkaline battery

• Dual Sensitivity
• LED light with 100,000 hour life
• Detects from 90 to 600 V AC
• Rated to CAT IV 600 V
• Dual Levels of Detection
• Blue indicates proximity to AC Voltage source
• Red indicates you’re at the source
• Operating temperature 0 deg C to 50 deg C
• Ultra-Bright White LED
• 100,000 hr bulb
• AAA battery included

Features and benefits of the T+

• 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
• Detect live voltage even when the batteries are dead
• Extra heavy-duty, replaceable test leads for more flexibility and durability
• CAT IV 600 V, CAT III 1000 V rated for added user protection
• Continuity beeper
• Bright LED flashlight for work in poorly lit areas
• GFCI Trip
• On/Off switchable beeper, selectable according to your environment
• Compliant with latest NFPA 70E recommendations*
• Replaceable test probes for added flexibility and convenience
• Convenient probe storage on the back
• Probe holder for easier testing
• Hazardous voltage warning light for added user protection
• Test lead strap included for better test lead management
• AC/DC Voltage: 12 V – 600 V on LED bar
• Auto-off saves battery power
• 2-year warranty

* When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment

Features and benefits of the T+PRO:

• Backlit LCD display for easier viewing
• Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
• Resistance (Ohms) to 9.99 kOhms
• Rotary Field Indication
• Display Hold for easier viewing in hard-to-test areas
• 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
• Detect live voltage even when the batteries are dead
• Extra heavy-duty, replaceable test leads for more flexibility and durability
• CAT IV 600 V, CAT III 1000 V rated for added user protection
• Continuity beeper
• Bright LED flashlight for work in poorly lit areas
• GFCI Trip
• On/Off switchable beeper, selectable according to your environment
• Compliant with latest NFPA 70E recommendations*
• Replaceable test probes for added flexibility and convenience
• Convenient probe storage on the back
• Probe holder for easier testing
• Hazardous voltage warning light for added user protection
• Test lead strap included for better test lead management
• AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V – 600 V on LCD
• Auto-off saves battery power
• 2-year warranty

• Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
• New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
• Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures
• Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure
• Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
• Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
• TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip
• Probes always show correct category rating for tip being used
• Environmental ratings: -20°C to 55°C (-4°F to 131°F), altitude: 2000 m (6,562 ft)
• Conforms to EN61010-031
• One-year warranty

• One pair (red, black) of comfort grip probes
• 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT II 1000 V, , 10 A rating
• CAT IV 600 V, CAT III 1000 V only with protective cap
• CSA listed
   

Key features

• Visual image and infrared heat map blending - Identify the exact location of the potential issue by blending the visual image with the heat map overlay at 0%, 25%, 50%, 75%, and 100% infrared with one button
• NEAR and FAR mode - Align the visual and thermal lenses to correctly identify the location of the issue
• Center measurement box - See the exact area of temperature measurement right on the screen
• Temperature alarms and automated monitoring features - Identify intermittent problems by monitoring equipment over time or get alerts when a temperature is outside the expected range
• Hot and cold markers - Instantly identify hottest and coldest spots within the field of view
• Save in .bmp or .is2 format - Choose .bmp when all you want is the image, or use .is2 format that can be edited in SmartView® software
• SmartView® reporting software - Optimize the image blending and palette and quickly create professional reports
• Pocket-size design - Handy when you need it; easily fits in your tool bag or pocket
• Intuitive interface - Get to work as soon as you take it out of the box
• Hard or soft case - Protect your visual IR thermometer with a soft case (VT04A) or hard case (VT04)
• Battery choices - Choose your preferred way of powering your visual IR thermometer: 4 AA batteries (VT04A) or a rechargeable Li-ion battery (VT04)

Measurement capability

• 400 A AC current measurement
• 600 V AC and DC voltage measurement
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 4 kΩ with continuity detection
• Temperature and capacitance measurement

Features

• Slim, ergonomic design
• Large, easy to read backlight display
• CAT IV 300V/CAT III 600 V safety rating
• Hold button
• Two-year warranty
• Soft carrying case

• < >Laboratory accuracy (0.05% + 0.3°C) Large backlit dual display presents all the information you need at a glanceMIN, MAX, and AVG - time references - captures major eventsElectronic Offset function maximizes overall accuracy by allowing you to compensate for thermocouple typesMeasures K, J, T, E, N, R, and S-types of thermocouplesReadout in ºC, ºF, or Kelvin (K)Splash and dust resistant case User-friendly front panel is easy to set up and operateSleep mode increases battery life; typical 1000-hour battery lifeBattery door allows easy battery replacement without breaking the calibration seal3 year warrantyUser-adjustable recording intervals
• Real-time lcock captures the exact timeof day of events
• Recall function allows logged data to be easily reviewed on the meter display
• Data Logging up to 500 points of data to internal memory
• IR communication port allows data to be exported to optional FlukeView Forms® Temperature PC software for further analysis and graphing

Features and benefits of the RLD2

• Six UV LEDs (395 nm wavelength) detect leak detection dyes
• Laser pointer clearly locates center of the UV field for accuracy
• Three LED flashlight with 100,000 hour LED life
• Operating temperature 0°C to 50°C
• Four operating modes: flashlight, UV light, laser light, UV/laser light combination
• Convenient detachable key chain carabiner and AAA battery included

• Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

• 3 phase indication
• Indication of phase rotation
• Indication of motor rotation direction
• Contact free determination of the rotation direction of running motors

• 3 phase indication
• Indication of phase rotation
• Clear LCD display
• No battery required

• • One pair (red, black) of nickel plated clips
  • Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base
  • Recommended for use with TL222 and TL224 test leads
  • CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
  • One year warranty
  •